Lattice Place and Route Report for Design "/mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base_map.ncd" Sat May 23 22:27:57 2026 PAR: Place And Route Diamond (64-bit) 3.14.0.75.2. Command Line: /usr/local/diamond/3.14/ispfpga/bin/lin64/par -w -l 5 -i 6 -t 1 -c 0 -e 0 -exp parUseNBR=1:parCDP=auto:parCDR=1:parPathBased=OFF /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base_map.ncd /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.ncd /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.prf Preference file: /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.prf. Placement level-cost: 5-1. Routing Iterations: 6 Loading design for application par from file /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base_map.ncd. Design name: top_zkf_mul_w8_m36_base NCD version: 3.3 Vendor: LATTICE Device: LFE5U-12F Package: CABGA381 Performance: 6 Loading device for application par from file 'sa5p25.nph' in environment: /usr/local/diamond/3.14/ispfpga. Package Status: Final Version 1.44. Performance Hardware Data Status: Final Version 55.1. License checked out. Ignore Preference Error(s): True Device utilization summary: PIO (prelim) 136/197 69% used 136/197 69% bonded SLICE 155/6048 2% used MULT18 4/28 14% used ALU54 2/14 14% used Number of Signals: 695 Number of Connections: 1081 Pin Constraint Summary: 0 out of 136 pins locked (0% locked). The following 2 signals are selected to use the primary clock routing resources: clk_c (driver: clk, clk/ce/sr load #: 79/0/0) n1271 (driver: u_dut/u_pack/SLICE_109, clk/ce/sr load #: 0/0/18) No signal is selected as Global Set/Reset. . Starting Placer Phase 0. ............ Finished Placer Phase 0. REAL time: 18 secs Starting Placer Phase 1. .................. Placer score = 1034727. Finished Placer Phase 1. REAL time: 45 secs Starting Placer Phase 2. . Placer score = 1031468 Finished Placer Phase 2. REAL time: 46 secs ------------------ Clock Report ------------------ Global Clock Resources: CLK_PIN : 1 out of 12 (8%) GR_PCLK : 0 out of 12 (0%) PLL : 0 out of 2 (0%) DCS : 0 out of 2 (0%) DCC : 0 out of 60 (0%) CLKDIV : 0 out of 4 (0%) Quadrant TL Clocks: PRIMARY "clk_c" from comp "clk" on CLK_PIN site "B11 (PT29A)", CLK/CE/SR load = 68 PRIMARY "n1271" from F1 on comp "u_dut/u_pack/SLICE_109" on site "R14C28B", CLK/CE/SR load = 18 PRIMARY : 2 out of 16 (12%) Quadrant TR Clocks: PRIMARY "clk_c" from comp "clk" on CLK_PIN site "B11 (PT29A)", CLK/CE/SR load = 5 PRIMARY : 1 out of 16 (6%) Quadrant BL Clocks: PRIMARY "clk_c" from comp "clk" on CLK_PIN site "B11 (PT29A)", CLK/CE/SR load = 4 PRIMARY : 1 out of 16 (6%) Quadrant BR Clocks: PRIMARY "clk_c" from comp "clk" on CLK_PIN site "B11 (PT29A)", CLK/CE/SR load = 2 PRIMARY : 1 out of 16 (6%) Edge Clocks: No edge clock selected. --------------- End of Clock Report --------------- + I/O Usage Summary (final): 136 out of 197 (69.0%) PIO sites used. 136 out of 197 (69.0%) bonded PIO sites used. Number of PIO comps: 136; differential: 0. Number of Vref pins used: 0. I/O Bank Usage Summary: +----------+----------------+------------+------------+------------+ | I/O Bank | Usage | Bank Vccio | Bank Vref1 | Bank Vref2 | +----------+----------------+------------+------------+------------+ | 0 | 24 / 24 (100%) | 2.5V | - | - | | 1 | 28 / 32 ( 87%) | 2.5V | - | - | | 2 | 21 / 32 ( 65%) | 2.5V | - | - | | 3 | 3 / 32 ( 9%) | 2.5V | - | - | | 6 | 21 / 32 ( 65%) | 2.5V | - | - | | 7 | 32 / 32 (100%) | 2.5V | - | - | | 8 | 7 / 13 ( 53%) | 2.5V | - | - | +----------+----------------+------------+------------+------------+ ---------------------------------- DSP Report ---------------------------------- DSP Slice #: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 # of MULT9 # of MULT18 2 2 # of ALU24 # of ALU54 1 1 # of PRADD9 # of PRADD18 DSP Slice 5 Component_Type Physical_Type Instance_Name MULT18_R13C22 MULT18X18D MULT18 u_dut/s1_mag_e3 MULT18_R13C23 MULT18X18D MULT18 u_dut/lat_mult_0 ALU54_R13C25 ALU54B ALU54 u_dut/lat_alu_3 DSP Slice 6 Component_Type Physical_Type Instance_Name MULT18_R13C26 MULT18X18D MULT18 u_dut/lat_mult_1 MULT18_R13C27 MULT18X18D MULT18 u_dut/lat_mult_2 ALU54_R13C29 ALU54B ALU54 u_dut/lat_alu_4 ------------------------------ End of DSP Report ------------------------------- Total placer CPU time: 27 secs Dumping design to file /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.ncd. 0 connections routed; 1081 unrouted. Starting router resource preassignment DSP info: No dsp pins have been swapped. Completed router resource preassignment. Real time: 58 secs Start NBR router at Sat May 23 22:28:55 EEST 2026 ***************************************************************** Info: NBR allows conflicts(one node used by more than one signal) in the earlier iterations. In each iteration, it tries to solve the conflicts while keeping the critical connections routed as short as possible. The routing process is said to be completed when no conflicts exist and all connections are routed. Note: NBR uses a different method to calculate timing slacks. The worst slack and total negative slack may not be the same as that in TRCE report. You should always run TRCE to verify your design. ***************************************************************** Start NBR special constraint process at Sat May 23 22:28:57 EEST 2026 Start NBR section for initial routing at Sat May 23 22:28:58 EEST 2026 Level 1, iteration 1 6(0.00%) conflicts; 663(61.33%) untouched conns; 200347 (nbr) score; Estimated worst slack/total negative slack: -2.710ns/-200.348ns; real time: 1 mins 2 secs Level 2, iteration 1 24(0.00%) conflicts; 621(57.45%) untouched conns; 186913 (nbr) score; Estimated worst slack/total negative slack: -2.695ns/-186.914ns; real time: 1 mins 2 secs Level 3, iteration 1 57(0.00%) conflicts; 242(22.39%) untouched conns; 2278 (nbr) score; Estimated worst slack/total negative slack: -0.072ns/-2.278ns; real time: 1 mins 4 secs Level 4, iteration 1 21(0.00%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.437ns/0.000ns; real time: 1 mins 5 secs Info: Initial congestion level at 75% usage is 0 Info: Initial congestion area at 75% usage is 0 (0.00%) Start NBR section for normal routing at Sat May 23 22:29:02 EEST 2026 Level 1, iteration 1 22(0.00%) conflicts; 21(1.94%) untouched conns; 0 (nbr) score; Estimated worst slack/total negative slack: 0.461ns/0.000ns; real time: 1 mins 6 secs Level 2, iteration 1 10(0.00%) conflicts; 26(2.41%) untouched conns; 0 (nbr) score; Estimated worst slack/total negative slack: 0.461ns/0.000ns; real time: 1 mins 6 secs Level 2, iteration 2 8(0.00%) conflicts; 27(2.50%) untouched conns; 0 (nbr) score; Estimated worst slack/total negative slack: 0.426ns/0.000ns; real time: 1 mins 7 secs Level 2, iteration 3 9(0.00%) conflicts; 26(2.41%) untouched conns; 0 (nbr) score; Estimated worst slack/total negative slack: 0.448ns/0.000ns; real time: 1 mins 7 secs Level 3, iteration 1 15(0.00%) conflicts; 7(0.65%) untouched conns; 0 (nbr) score; Estimated worst slack/total negative slack: 0.449ns/0.000ns; real time: 1 mins 8 secs Level 4, iteration 1 12(0.00%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.265ns/0.000ns; real time: 1 mins 8 secs Level 4, iteration 2 8(0.00%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.280ns/0.000ns; real time: 1 mins 9 secs Level 4, iteration 3 8(0.00%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.205ns/0.000ns; real time: 1 mins 10 secs Level 4, iteration 4 5(0.00%) conflicts; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.205ns/0.000ns; real time: 1 mins 10 secs Level 4, iteration 5 1(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.245ns/0.000ns; real time: 1 mins 10 secs Level 4, iteration 6 1(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.245ns/0.000ns; real time: 1 mins 10 secs Level 4, iteration 7 1(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.265ns/0.000ns; real time: 1 mins 11 secs Level 4, iteration 8 1(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.265ns/0.000ns; real time: 1 mins 11 secs Level 4, iteration 9 1(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.245ns/0.000ns; real time: 1 mins 11 secs Level 4, iteration 10 0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.245ns/0.000ns; real time: 1 mins 11 secs Start NBR section for setup/hold timing optimization with effort level 3 at Sat May 23 22:29:08 EEST 2026 Start NBR section for re-routing at Sat May 23 22:29:14 EEST 2026 Level 4, iteration 1 0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score; Estimated worst slack/total negative slack: 0.245ns/0.000ns; real time: 1 mins 17 secs Start NBR section for post-routing at Sat May 23 22:29:14 EEST 2026 End NBR router with 0 unrouted connection NBR Summary ----------- Number of unrouted connections : 0 (0.00%) Number of connections with timing violations : 0 (0.00%) Estimated worst slack : 0.245ns Timing score : 0 ----------- Notes: The timing info is calculated for SETUP only and all PAR_ADJs are ignored. Total CPU time 49 secs Total REAL time: 1 mins 29 secs Completely routed. End of route. 1081 routed (100.00%); 0 unrouted. Hold time timing score: 0, hold timing errors: 0 Timing score: 0 Dumping design to file /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.ncd. PAR_SUMMARY::Run status = Completed PAR_SUMMARY::Number of unrouted conns = 0 PAR_SUMMARY::Worst slack> = 0.245 PAR_SUMMARY::Timing score> = 0.000 PAR_SUMMARY::Worst slack> = 0.174 PAR_SUMMARY::Timing score> = 0.000 PAR_SUMMARY::Number of errors = 0 Total CPU time to completion: 49 secs Total REAL time to completion: 1 mins 30 secs par done! Note: user must run 'Trace' for timing closure signoff. Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved. Copyright (c) 1995 AT&T Corp. All rights reserved. Copyright (c) 1995-2001 Lucent Technologies Inc. All rights reserved. Copyright (c) 2001 Agere Systems All rights reserved. Copyright (c) 2002-2024 Lattice Semiconductor Corporation, All rights reserved. $ /usr/local/diamond/3.14/ispfpga/bin/lin64/par -w -l 5 -i 6 -t 1 -c 0 -e 0 -exp parUseNBR=1:parCDP=auto:parCDR=1:parPathBased=OFF /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base_map.ncd /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.ncd /mnt/storage/test/zkf-vs-flopoco/artifacts/targets/ecp5-diamond/rows/zkf_mul_w8_m36_base/top_zkf_mul_w8_m36_base.prf [exit code 0]